Revhigh LS Rocker Arms with BTR Upgraded Trunion Bearings Installed
 
LS1 style Allen head bolts are included for installation. 
 
Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended.   The stock bearings have a tenancy to fail.  These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.  We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure.

Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 – 4.8/5.3/5.7/6.0/ Engines

This kit includes:
16 LS Series Rocker Arms
16 rocker arm BTR trunnions- LS-type retrofit
32 rocker arm BTR bearings- LS-type retrofit
32 rocker arm BTR retaining rings- LS-type retrofit
16 bolts for LS trunnion kit

Install the upgraded rocker arms to the cylinder heads using the new socket 
head cap screws supplied. Be sure to rotate the trunion so that the 
flat recess side of the trunion's center hole faces upward (the socket 
head cap screw must seat against this recessed flat side of the hole). 
Tighten the cap screw to a value of 22 ft-lbs, following the OE 
installation procedure.