REVHIGH Purge solenoids, made in the USA, direct fitment, great quality! Sometimes these need to be replaced due to the plastic going brittle over many many years.
Also known as the Emission Control Canister Purge Solenoid, the Vapor Canister Purge Solenoid/Valve allows fuel vapor flow from the EVAP system. It transfers fuel vapors stored in the vapor canister into the engine's intake system by opening and closing as commanded by the engine's computer system. The solenoid is normally closed to prevent fuel vapors from entering the engine during a non-purge condition.
The vent solenoid, located near the EVAP canister inside a wheel well or under the vehicle near the fuel tank, usually fails before the purge solenoid. The purge solenoid will fail closed or will fail by sticking partially open illuminating a check engine light. When illuminated, common failure modes are:
- Electrical failure of the purge valve control circuit
- Electrical failure of the purge solenoid
- Vacuum line leaks
- Plugged vacuum line
REVHIGH Vapor Canister Purge Solenoids/Valves are an exact match of OE specifications
Attention California Customers -
WARNING: This product contains a chemical known to the State of California to cause Cancer and Reproductive Harm.
Watch the video here.
Let's talk Purge Solenoids on your Holden Commodore V6 3.6L & 3.0L LY7 LE0 LLT LF1 LFX LFW